Licensed & Insured · CA Lic #50759•Call (949) 478-0089

Oven Repair in Orange County

Oven not heating? We repair gas, electric, wall and double ovens.

Your diagnostic visit is FREE with any repair. Otherwise, it's just $80.

Same-day appointments may be available. Call to check.

Fortex technician repairing an oven with a power drill

What if it's something simple?

Sometimes it's something simple, like an unplugged cord, a tripped breaker, a closed water valve, or a child lock left on. We'll take care of it right there, covered by the $80, with nothing extra to pay.

Common problems

Common problems we fix

  • Oven won't heat or won't reach temperature
  • Bakes unevenly, burns one side, or runs hot or cold
  • Gas oven clicks but won't light
  • Broil works but bake doesn't, or the reverse
  • Control panel, display, or touchpad dead
  • Oven door won't close, seal, or the glass is broken
  • F-codes or error codes on the display
  • Self-clean cycle killed the oven

Sound like your oven?

Same-day appointments may be available. Call to check.

We're closed right now, book online and we'll call you first thing.

Oven repair Change

Leave your details. We'll call to confirm your appointment.

We'll call you to confirm availability and your appointment window. Your diagnostic visit is free with any repair. Otherwise, it's just $80.

Request an appointment

We call you back to agree a time

No account, no full address and no model number needed to get started. Tell us the appliance and how to reach you, and a licensed technician takes it from there.

Likely causes

What is usually behind it

The same symptom can have very different causes, and they cost very different amounts. This is what we are actually looking for.

What you seeUsual causeWhat we do
Won't heat at allFailed bake element or igniterTest element draw and igniter current, replace the failed part, confirm it reaches the set temperature
Runs hot or coldDrifted temperature sensorMeasure sensor resistance cold and hot, replace it, recalibrate against a reference thermometer
Clicks but never lightsWeak gas igniterA weak igniter still glows but no longer draws enough current to open the safety valve, so gas never flows
Bakes unevenlyConvection fan or a leaking door sealTest the fan motor and the seal. A leaking door is the cause people least expect
Dead display or F-codeControl board or touchpadRead the code and isolate board from touchpad, so only the part that actually failed gets replaced

A recent oven repair

Oven Control Board and Bake Element Replacement: A Repair Story

Dacor range during the service visit
Dacor range during the service visit.

How we discussed original and aftermarket parts with the owner, and why reaching the board took more than four hours of work.

See this repairHide details

The owner told us this Dacor range had worked for about 20 years before its first breakdown. They wanted to keep it, so we took a look at what it would need.

We found heat damage at the power-wire connector on the control board. The connection on the board was burned, and a relay on the board had failed too. The oven’s bake element was also worn and no longer performing as it should.

Original Dacor range control board with heat damage at a wiring connection
Original control board with heat damage at a wiring connection.

We explained that the control board needed replacing to get the range working properly, and we strongly recommended replacing the bake element as well.

With both parts priced as original replacements, plus the work needed to install them, the total was more than the customer wanted to spend. They asked a fair question: was there a sensible way to bring the cost down?

For the board, there was. We found a lower-cost aftermarket replacement made to fit this application, with a one-year warranty. It was available as a direct replacement, so we wouldn’t have to adapt a different board to make it work. Given the relatively straightforward design of this board, we felt it was a reasonable option to discuss with the customer.

Aftermarket replacement control board installed in the Dacor range
Aftermarket replacement control board installed during the repair.

Our recommendation for the bake element was different.

We didn’t have a direct aftermarket replacement available for this model. It might have been possible to find something with similar dimensions and resistance, but that would still leave questions about how it would fit and distribute heat inside the oven. We didn’t feel that was a good place to experiment just to save on the part.

So we talked through the difference: an aftermarket board made for the application was one option; adapting a merely similar heating element was another. We recommended the original bake element, and the customer chose to go ahead with the aftermarket board and original element. This oven repair involved both the control board and the bake element.

Getting those parts installed was a job in itself.

The board looked as though it would be easy to reach behind the front panel. But seeing it and having enough room to replace it turned out to be two different things. We had to lift the cooktop assembly and continue taking things apart from there. Even the photo with the top lifted only shows part of the access work.

Dacor range with the cooktop assembly lifted for access to the control board
Cooktop assembly lifted during access to the control board.

With tubing, wiring, and older components around the board, we worked carefully through the disassembly. The repair took more than four hours.

The photo of the glowing bake element shows the new original part heating during the service visit.

New original bake element heating in the Dacor oven
New original bake element heating during service.

After roughly 20 years of use, this range was worth having a conversation about before deciding to replace it. We couldn’t promise another 20 years, but we could explain the options and help the owner choose a repair they were comfortable with.

That meant being clear about which part was original, which was aftermarket, and why we recommended each one.

Every kind

Yes, we work on yours

Including the awkward installs other companies would rather not take on.

Built-in & wall ovens

Single and double wall ovens pulled from the cabinet, serviced, and reset flush. Thermador, Wolf, Viking, Bosch and Miele included.

Double ovens

Upper and lower cavities are separate heating systems that usually share one control board. We diagnose them independently, so you never pay to replace a part that still works.

Range ovens

The oven half of a freestanding or slide-in range, gas or electric. Burner and cooktop faults live on our stove & cooktop page.

Gas, electric & dual-fuel

All three, plus convection and steam ovens, from every major brand sold in the U.S.

Not sure which you have?

Send a photo of the model label so we can check parts availability before the visit.

We're closed right now, book online and we'll call you first thing.

What to expect

From first call to fixed

From first call to a working appliance, with no surprises along the way.

  1. 1

    Call, text or book online

    It takes about a minute. Tell us the appliance, the brand and what it's doing. We reply quickly Monday to Saturday, 9am to 6pm.

  2. 2

    Confirmed within the hour

    During business hours you hear back within an hour with your appointment time and the name of your technician. Visits start at 9am. Outside hours, we call you first thing the next working day.

  3. 3

    A 2-hour arrival window

    No waiting at home all day. You get a 2-hour window, plus a text about 30 minutes before arrival when your technician is on the way.

  4. 4

    $80 diagnosis, free with repair

    The technician finds the cause and gives you the full price before any work starts. Approve the repair and the service call is free.

  5. 5

    Fixed, usually in one visit

    Factory (OEM) parts from authorized distributors by default, or a lower-cost aftermarket part if we offered one and you chose it. 1 year on OEM parts, 90 days on labor.

Two Fortex technicians after a repair in a customer's kitchen
Who you can expect at your door
Fortex technician repairing an oven with a power drill

Why Fortex

Why choose Fortex for your repair

  • Same-day & next-day service

    Most repairs scheduled the same or next day across Orange County. We know a broken appliance can't wait.

  • Licensed & insured

    California license #50759 and full liability insurance. A vetted, uniformed technician every time.

  • Upfront, honest pricing

    A clear all-in quote before any work begins. Free service call with your repair and no surprise add-ons.

  • Warrantied repairs

    A full year on original manufacturer (OEM) parts and 90 days on our labor, on every job.

  • We come to you

    Fully stocked vans mean most parts are on board, so we finish the job in one visit whenever possible.

  • Clean, respectful service

    Shoe covers, tidy work area, and a friendly tech who treats your home like their own.

FAQ

Oven repair FAQs

How much will my oven repair cost?

It depends entirely on which part failed. The same symptom can be an inexpensive igniter or a control board that costs several times more. Guessing before we look would be dishonest. The service call is $80 and it is waived once you approve the repair. The technician finds the real cause and gives you the full, all-in price before touching anything, and you decide then.

What does the $80 service call cover?

A licensed technician comes out, diagnoses the actual fault, and gives you a complete price for the fix. If you approve the repair, the $80 is waived and you only pay for the repair itself. If you decide not to go ahead, you pay the $80 and owe nothing further. And if it turns out to be something simple, like a tripped breaker or a child lock, we sort it out there and then, covered by the same $80, with nothing extra to pay.

My oven won't hold the right temperature.

That is almost always a failed bake element, igniter, or temperature sensor. We test each one, replace what actually failed, and verify the calibration against a reference thermometer before we leave.

Do you repair double ovens?

Yes. The upper and lower cavities are separate heating systems that usually share a single control board, so we diagnose them independently. That way you are not paying to replace a part that still works.

Do you work on built-in and wall ovens?

Yes, including high-end built-ins. Many repairs are done in place; some need the oven pulled from the cabinet and reset flush. Thermador, Wolf, Viking, Bosch, Miele and other premium brands are routine for us.

My gas oven clicks but never lights. Is that dangerous?

It is the most common gas oven fault, and it is usually a weak igniter. The igniter has to draw enough current to open the safety valve; once it weakens it still glows but never opens the valve, so no gas flows. If you actually smell gas, that is different: do not use the oven or any switch or device near it. Leave the house and call SoCalGas at 1-800-427-2200, or 911 if anyone is in danger, from outside. Book a repair only once the gas company says it is safe.

Do you repair both gas and electric ovens?

Yes, gas, electric, dual-fuel, convection and steam ovens from every major brand.

How long does an oven repair take?

Most are finished in a single visit, usually under two hours. Our vans carry the common elements, igniters and sensors. A control board for a premium built-in sometimes has to be ordered, and we tell you that at the quote rather than afterwards.

Is it worth repairing my oven or should I replace it?

We will tell you honestly once we have diagnosed it. The rough rule is that if the repair costs less than half of a comparable new unit, repairing wins, and for built-in ovens, where replacing also means cabinetry work, repair is often the better choice.

What warranty do I get?

Our labor carries 90 days on every completed repair, and original manufacturer (OEM) parts carry a full year. We tell you which parts are going in before you approve the work.

Still not sure?

Call and describe it. We will tell you straight whether it is worth fixing.

We're closed right now, book online and we'll call you first thing.

Need your oven repaired today?

Call now or book online and a licensed Fortex technician will be at your door, often the same day.

Call Now Request Appointment