Fisher & Paykel DishDrawer Repair in Orange County
A drawer that won't start or lock, water left in the bottom, beeping and error codes, leaks. We repair single and double DishDrawers, integrated and stainless.
Your diagnostic visit is FREE with any repair. Otherwise, it's just $80. The repair price is agreed with you before work starts. See estimated repair costs
- ★★★★★ 4.9 on Yelp · 126 reviews
- Licensed CA #50759
- 1 year on OEM parts / 90 days labor

Common problems
What we fix on Fisher & Paykel DishDrawers
- Drawer won't start
- Drawer won't open or stays locked
- Grinding or squeaking noise
- Not washing, dishes come out dirty
- Lid doesn't close or seal
- Water left in the drawer
- Beeping / error code
- One drawer works, the other doesn't
- Leaking
Sound like yours?
Same-day appointments may be available. Call to check.
We're closed right now, book online and we'll call you first thing.
Request an appointment
We call you back to agree a time
No account, no full address and no model number needed to get started. Tell us the appliance and how to reach you, and a licensed technician takes it from there.
Likely causes
What is usually behind it
The same symptom can have very different causes, and they cost very different amounts. This is what we are actually looking for.
| What you see | Usual cause | What we do |
|---|---|---|
| Won't start | Lid actuator, control board, harness; or the key lock is on | Check the lock setting, test the actuator and harness, then the board |
| Stays locked | Lid actuator or its wiring | Test the actuator and wiring, replace the failed part |
| Grinding or squeaking | Debris in the drain or wash pump, worn pump | Clear the filter, inspect and test both pumps |
| Not washing | Clogged filter or spray arm, weak wash pump, low water fill | Clean the filter and arm, check fill, test the pump |
| Water left | Drain pump, filter | Clear the filter, test the pump |
| One drawer dead | That drawer's board, motor or cable | Test that drawer's parts on their own |
| Leaking | Lid seal, hoses | Replace the seal or hose |
| Error codes | Sensor, valve or motor fault | Read the code, test the named part |
Original Fisher & Paykel parts first, your budget in mind
Drawer motors and boards, drain pumps, lid actuators, seals and cable harnesses: we prefer factory (OEM) parts bought from authorized distributors. You come first, though: when a lower-cost aftermarket part would do the job without losing quality, we will offer it, explain the difference, and you decide. 1 year on OEM parts, 90 days on labor. Warranty terms for any aftermarket option are explained before you approve the repair.
Fortex is an independent repair company, not a factory-authorized service provider for Fisher & Paykel. If your appliance is covered by the manufacturer’s warranty, contact the manufacturer first.
What to expect
From first call to fixed
From first call to a working appliance, with no surprises along the way.
-
1
Call, text or book online
It takes about a minute. Tell us the appliance, the brand and what it's doing. We reply quickly Monday to Saturday, 9am to 6pm.
-
2
Confirmed within the hour
During business hours you hear back within an hour with your appointment time and the name of your technician. Visits start at 9am. Outside hours, we call you first thing the next working day.
-
3
A 2-hour arrival window
No waiting at home all day. You get a 2-hour window, plus a text about 30 minutes before arrival when your technician is on the way.
-
4
$80 diagnosis, free with repair
The technician finds the cause and gives you the full price before any work starts. Approve the repair and the service call is free.
-
5
Fixed, usually in one visit
Factory (OEM) parts from authorized distributors by default, or a lower-cost aftermarket part if we offered one and you chose it. 1 year on OEM parts, 90 days on labor.
FAQ
Fisher & Paykel DishDrawer repair FAQs
How much does DishDrawer repair cost?
It depends on the model and what the diagnosis finds. Estimated ranges for common Fisher & Paykel DishDrawer repairs are listed at the bottom of this page. The service call is $80 and free with repair, and we confirm the total before any work begins.
Is a DishDrawer worth fixing?
Usually. A new DishDrawer is expensive and has to fit the same cabinet opening, so a repair is almost always cheaper.
Do you use original parts?
Yes, by default: OEM parts from authorized distributors. When a lower-cost aftermarket part would do the job without losing quality, we offer it and you decide.
Estimated Fisher & Paykel DishDrawer repair costs
| Repair | Estimated range |
|---|---|
| Drawer control board / motor | $280 – $520 |
| Drain pump | $200 – $360 |
| Lid actuator / lid seal | $220 – $400 |
| Water inlet valve | $180 – $300 |
| Drawer slides or cable harness | $220 – $420 |
Estimated repair ranges are a guide. Your final quote depends on the appliance model, parts required and diagnostic findings. We confirm the total before work begins. Service call: $80, free with repair.
More Fisher & Paykel: all Fisher & Paykel appliances we repair · Other brands: dishwasher repair
Need your Fisher & Paykel DishDrawer fixed?
Call now or book online and a licensed Fortex technician will be at your door, often the same day.